WATA Products

Target SDGs

Market Suggested Retail Price

$417.00

Target Users (Target Impact Group)

Community, Small and Medium-sized Enterprises, Public Sector Agencies, NGOs

Distributors / Implementing Organizations

This product has been implemented by the Ministry of Health of Burkina Faso and Hydrolic in Cambodia.

Competitive Landscape

Direct competitors include PurAll Water Purification, MSR SE200 Community Chlorine Maker, P&G Purifier of Water, Lotus Water Chlorine Dosing Device, Zimba automatic chlorine dispenser, Aquatab Tablets, and WaterGuard.

Manufacturing/Building Method

The dispenser is installed near a water source. It is fitted with a valve that consistently delivers a precise 3 ml dose of chlorine. The tank is filled with sodium hypochlorite (chlorine) solution and installed at the water source in a protective casing. Community members go to their water source, place their bucket or jerrycan under the dispenser, turn the valve to dispense the correct amount of chlorine, and then fill the bucket with water. The chlorine disinfects the water within 30 minutes, then the chlorine residual prevents recontamination for 2-3 days.

Intellectural Property Type

Trademark

User Provision Model

Users can contact country-specific partners for the distribution or can purchase directly from the website.

Distributions to Date Status

As of 2019, more than 5,000 products have been distributed.

Design Specifications

WATA is an electronic device used to produce active chlorine for disinfection out of salt, water, and electricity. The WATA products produce the sodium hypochlorite equivalent to 6 g/L (0.6%) at different rates (1 g/hr to 80 g/hr) depending on the model. One liter of the solution is enough to treat 4,000 L of drinking water. Supplies required: clear water, salt (400 g/L of water), and electricity (30 W or 110-220 V). WATTA includes 5 devices with different active chlorine production capacities. The design specification for individual WATTA products can be found here.

Product Schematics

Technical Support

Provided by the manufacturer (Antenna Technologies).

Replacement Components

Consumables can be purchased online from Antenna Technologies.

Lifecycle

This product has a 2-year warranty and a lifecycle of approximately 5 years assuming 5 productions a week.

Manufacturer Specified Performance Parameters

Designer specified performance targets include: lightweight, durable, portable, locally produced, and low-cost. Moreover, this filter was also designed to prepare active chlorine solution that can be used to treat drinking water or disinfect any objects or surfaces.

Vetted Performance Status

Antenna views the continued support from customers as evidence of vetted performance. Correspondence with manufacturer WATA devices have been sold for almost 10 years to large organizations such as WHO, ICRC, UNICEF, Swiss Agency for Development and Cooperation, MSF, OXFAM, HELVETAS, CARITAS, and others.

Safety

Limestone deposits are formed during production which needs to be cleaned with 1:1 clean water and vinegar solution to ensure efficiency. Ideally, the power supply is to be placed in a room adjacent to the production room. If this is not possible, place it as far as possible from the container where the chlorine is produced, in order to avoid contact with chlorine vapor which is highly corrosive. The power supply should not be placed on the floor level and the devices need to always be immersed in the saltwater solution before being plugged into the power supply. The devices need to be rinsed with clear water after each production.

Complementary Technical Systems

WataTest, WataBlue reagents.

Academic Research and References

Compliance with regulations

WATA technology complies with recommendations of CDC and WHO (2004) for the disinfection in health centers.

Evaluation methods

The product has been field-tested for more than 10 years.

Other Information

Videos